JVC KW-NT50HDT Manual De Instrucciones página 92

Troubleshooting/error messages
Symptoms
Playback does not start.
Sound and pictures are sometimes interrupted
or distorted.
No playback picture is shown and caution
message about parking brake appears on
the screen, even when the parking brake is
engaged.
No picture appears on the external monitor.
"Read error"
"No Disc"
• "Eject Error"
• "Loading Error"
"Region code error"
Disc cannot be played back.
Noise is generated.
Tracks are not played back as you have
intended them to play.
Elapsed playing time is not correct.
"Error"
Noise is generated.
Tracks cannot play back as you have intended
them to play.
Remedies/Causes
• Insert the disc correctly again.
• The format of files is not supported by the unit.
• Stop playback while driving on rough roads.
• Change the disc.
Parking brake lead is not connected properly.
(☞ Installation/Connection Manual)
• Connect the video cord correctly.
• Select the correct input on the external monitor.
• A disc is inserted upside down. Replace the disc.
• A disc has no playable files.
Disc is not inserted. Insert a disc or select another playback
source.
• Eject the disc forcibly. (☞ page 4)
• Check the disc.
Region code is not correct. (☞ page 51)
• Change the disc.
• Record the tracks using a compliant application on the
appropriate discs. (☞ page 51)
• Add appropriate extension codes to the file names.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using
other players.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
The track is unplayable.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using
other players.
92