Cetron JLC1700T Guía De Usuario página 63

Match ignition ranges
(See features by model chart at the
end of the manual.)
Make sure that the knobs
1
are in the off position.
Light a match.
2
3 Push and turn the knob of
the burner you want to use.
4 Carefully bring the lit match
next to the burner.
Ranges with electronic
ignition button.
(See Features by model chart, at the
end of the manual.)
When pressing the ignition
button, the electrical plugs will
automatically spark in all burn-
ers. This is normal.
Verify that the knobs are in
1
the off position, they should
be out and make sure that
the range is connected to
the electric power supply.
Your range could be
2
equipped with a dual
function button that will turn
on the burners and the oven
light. The UP position turns
the burners on, and the
DOWN position turns on the
oven light. Press and hold
the button to the side
marked with a star indicator,
you will hear the distinctive
sound of the electrical plug
of the burner.
Push the knob corresponding
3
to the burner you want to
use and turn it to the on
position. The burner will
ignite after a few seconds.
Once lit, release the button
and regulate the flame by
turning the knob.
ON
position
Burners ON
position
Oven Light
ON
position
63