POLTI Forzaspira C 115 Manual De Instrucciones página 21

the filter (15).
- Rinse the HEPA filter using running water
only and shake gently to remove any excess
dirt or water residue; before replacing the filter
in the appliance, leave to dry naturally away
from direct light and heat for at least 24 hours.
The filters should be fully cleaned approxima-
tely twice per year.
WARNING: Check the filters during cleaning.
Replace the filters when visibly damaged.
WARNING: Do not clean the filters with the
brush as they can be damaged, reducing
their filtering capacity. Do not use deter-
gents, do not rub the filter, and do not wash
it in a dishwasher.
9. STORAGE
9.1 Turn off the appliance and disconnect from
the mains electricity.
9.2 Press the cable-winder button
tivate the automatic winding guiding it gently
back into the appliance.
9.3 The hose and flexible hose can be housed
on the body of the appliance, sliding the uni-
versal brush into the parking system on the
appliance (16).
9.4 The small nozzle and the 2in1 lance can be
attached to the telescopic tube using the ac-
cessory holder. Attach the single ring to the
telescopic tube and insert the accessories in
the 2 other rings (17).
(6) to ac-
| 21 |