Descargar Imprimir esta página

Chauvet DJ 4BAR LT QuadBT ILS Guía De Referencia Rápida página 2

Ocultar thumbs Ver también para 4BAR LT QuadBT ILS:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
EN
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
ALWAYS:
Connect to a grounded circuit.
Connect to operating voltages as specified on the product's spec sticker.
Disconnect from power before replacing the fuse.
Disconnect from its power source during periods of inactivity.
Use a safety cable when suspending overhead.
Heed all restrictions and warnings on the spec sticker.
Mount in a location with at least 20 in (50 cm) of ventilation.
Replace the fuse with the same type and rating.
In the event of a serious operating problem, stop using immediately.
DO NOT:
Open this product or attempt any repairs. It contains no user-serviceable parts.
Look at the light source when the product is on.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Touch the housing when it is on.
Block any ventilation holes/slots in the housing.
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Submerge.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
What is Included
4BAR LT QuadBT ILS
Power cable
Tripod
Carrying bag
Footswitch
L brackets
Quick Reference Guide
Control Panel Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
1
QUICK REFERENCE GUIDE
4BAR LT QuadBT ILS QRG Rev. 2

Publicidad

loading