Publicidad
Idiomas disponibles
Idiomas disponibles
12
12A
CLOSED
12 FLOW FUNCTION
By rotating the Lever Handle (12A) counterclockwise, the valve will be activated.
The water flow will increase by continuing to rotate the Lever Handle (12A).
13
FULL HOT
13 TEMPERATURE CONTROL
By rotating the Knob (13A) clockwise, the water temperature will decrease
to cold flow only. By rotating the Knob (13A) counter-clockwise, the water
temperature will increased to hot flow only.
14
UP
For
Shower
14A
14 TUB SPOUT FUNCTION
When the valve is turned on, water normally flows through the Tub Spout (14A).
To activate the shower, turn valve on and pull the Knob (14B) up. Hold on until
water flows continuously from the shower arm.
OPEN
FULL COLD
13A
14B
ENGLISH
15
15 FINAL FLUSHING
For final flushing, turn valve on and allow water to run through the Tub Spout
(15A) for several minutes. Pull Spout Knob (15B) up to allow water to run through
Shower Arm (15C). Allow water to run for several minutes until all foreign matter
clears the line.
16
16B
16A
16 SHOWER HEAD INSTALLATION
Thread Shower Head (16A) onto Shower Arm (16B).
Make sure Shower Head (16A) is securely tightened to Shower Arm
(16B).
4
15C
15B
15A
Publicidad
