Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4.5F MANUAL HUMIDIFICATION
Manual humidification can be activated while cooking by pressing
button H.
The valve that injects steam in the cooking chamber is activated
only when button H is pressed.
It is possible to change the parameters during the cooking in order to adapt it
to the food.
4.6A AUTOMATIC COOKING PROGRAMS
You can store up to 99 programs, from P01 – to P99. There are 3
phases for each program. 3 leds indicate the working phase (or the
phase that is being set).
For each phase can be set:
- temperature
- time
- humidification
The oven is supplied with preset but not configured programs.
To search a program, select the programs list (not during a cooking) with
button P (pressing it slightly). The led next to button P is flashing, the upper
display is turned off and the lower shows the name of the program (P01...P99).
Using the buttons with arrows you can go up and down the list. To confirm the
chosen program, press again button P. The display shows the standard screen,
the led next to button P is on and the lower display shows the number of the
selected program. The cooking parameters of each phase can be changed. Pres-
sing Start, the preheating of the selected program starts.
4.6B STORING A PROGRAM
To store a program after selecting and modifying it, press button
P for 5 seconds with the number of the program shown on the
display.
The storing is confirmed by program leds flashing for some seconds. If the
display shows phases settings, you need to press P to change view and then
again for 5 seconds to store the program.
4.6C DELETING A PROGRAM
To delete a program when it is shown in the programs list, press for long and
simultaneously buttons F and D.
The deleted program becomes empty (not written) and it is stored.
4.6B QUITTING AUTOMATIC PROGRAMS
To go back to manual cooking, press ON/OFF.
4.7 SWITCHING OFF THE OVEN
To switch off the oven, press ON/OFF for some seconds (until the display turns off).
14
Publicidad
