Celestron STARPOINTER Manual De Instrucciones página 3

INSTALLING THE STARPOINTER FINDERSCOPE
1 1
1. Loosen the two mounting screws near
the bottom of the finderscope.
4 4
4. If your bracket is the dovetail type,
loosen the setscrew on the telescope
mounting bracket, slide the base of
the finderscope into the bracket and
tighten the setscrew.
* SOLAR WARNING! Never attempt to view the Sun through this finderscope or any telescope without a solar filter!
2 2
2. Choose the correct bracket for your
telescope, and attach it to the base of
the finder.
OR
If your bracket is the screw-on type,
remove the two Phillips-head screws or
thumb screws from the telescope. Place
the finder over the screw holes or posts.
Tighten the screws or thumb screws
down to secure the finder in place.
StarPointer Red-dot Finderscope
TM
3 3
3. Tighten the screws to secure the
bracket in place.
5 5
5. A clear plastic tab prevents the battery
from discharging. Pull out the tab before
using your finderscope.
ENGLISH | 3