Celestron STARPOINTER Manual De Instrucciones página 5

Idiomas disponibles

ACCESSING THE FINDERSCOPE BATTERY

The StarPointer finderscope uses a long-life 3V lithium battery (#CR2032), which is located on the StarPointer's top surface. If you plan

on not using your telescope for an extended period, we recommend removing the battery for storage. To remove or replace the battery,

follow these instructions:

1. Using a Phillips-head screwdriver, loosen the

battery cover screw and flip the cover open.

NOTE: You will need a small Philips-head screwdriver to replace the StarPointer finderscope's battery

SAFETY INSTRUCTIONS

• There is a risk of explosion if the battery is replaced with an incorrect type.

• The included battery is not rechargeable.

• Only use the battery as originally intended to avoid a short circuit. Connecting the conductive material

directly to the battery's positive and negative sides will cause a short circuit.

• Do not use a damaged battery.

• Do not store the battery in an extremely cold or hot environment. Doing so can reduce battery life.

• When replacing the battery, refer to the instruction manual and ensure the positive and negative sides are

oriented correctly.

• Do not put the battery in fire.

• Dispose of the battery according to local regulations.

FCC NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

Celestron.com • 2835 Columbia Street, Torrance, CA 90503 USA

Product design and specifications are subject to change without prior notification.

This product is designed and intended for use by those 14 years of age and older.

Made in China

2. If you are replacing the battery, install the new

one with the (+) terminal facing outward.

StarPointer

Red-dot Finderscope

3 3

3. Place the cover back onto the finderscope

and retighten the screw with the Phillips-

head screwdriver.

www.celestron.com/pages/warranty

06-23

51630