Bergstrom SLIMFIT IVECO Euro 6 Instrucciones De Montaje página 20

SLIMFIT
EN
Position the console and align the unit by
5
moving it on the seal, ensuring it remains in
the location of the original console.
Caution: Check on the outside that the
wastewater outputs are outside the EPDM
seal.
Remove the inner air distribution panel and
6
set aside securing screws.
Mount (4) M6 M-F hexagons with (4) rubber
7
washers, (4) flat washers in the base inserts
as shown:
- (2) hexagons L=26 in the rear part.
- (2) hexagons L=85 in the front part.
M6 L=85
M6 L=26
20
5
6
M6 L=85
M6 L=26