Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly method
Step 5: Install the pole and plastic sheath
Before installation, prepare 6 support tubes (parts in Figure 10). After confirming the
upper and lower ends of the pole, place the end with the hole corresponding to the
position of the hole on the bed, install the pole, and fix it with screws. Press the
plastic sheath into the hole in the head of the pole and fix it with screws. As shown
below.
Step 6: Install the Safety Net
For this, prepare a safety net (Parts Figure 9)
Insert the safety net (with the plastic buckle facing down) horizontally from the top
of the support rod. After inserting, use the plastic buckle on the safety net to fix the
bottom elastic rope. So our trampoline is installed.
Refer to the image below.
Publicidad
