Metabo HS 8755 Manual Original página 7

Original instructions
1. Declaration of Conformity
We declare under our sole responsibility: These
hedge trimmers, identified by type and serial
number *1), comply with all relevant requirements of
the directives *2) and standards *3). Technical file
at *4) - see page 3.
2000/14/EC: Conformity assessment procedures in
accordance with Annex V.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
hedge trimmers, identified by type and serial
number *1) on page 3, fulfill all relevant provisions of
following UK Regulations S.I. 2016/1091, S.I. 2008/
1597, S.I. 2001/1701, S.I. 2012/3032 and
Designated Standards EN 60745-
1:2009+A11:2010, EN 60745-2-15:2009+A1:2010,
EN IEC 63000:2018
S.I. 2001/1701: Conformity assessment proce-
dures in accordance with schedule 8
2. Specified Use
These hedge trimmers are suitable for cutting
hedges and bushes.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.
3. General Safety Instructions
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold
material to be cut when blades are moving.
Make sure the switch is off when clearing
jammed material. A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling oft the hedge
trimmer will reduce possible personal injury from
the cutter blades.
Hold the power tool by insulated gripping
surfaces only, because the cutter blade may
contact hidden wiring. Cutter blades contacttng a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the blade.
Pull the plug out of the plug socket before any
adjustments, conversions or servicing are
performed.
The electrical system to which the hedge trimmer is
connected should be equipped with a differential
current safety switch (with a max. of 30 mA release
current).
Remove the plug from the mains
immediately if the cable is damaged or
severed.
Never use in rain or on wet hedges.
Metabo S-automatic safety clutch. When
the safety clutch responds, switch off the
machine immediately.
Persons under the age of 16 must not used the
hedge trimmer.
Never use an incomplete machine, or one on which
an unauthorised modification has been made.
Do not switch on the machine if tool parts or guard
devices are missing or defective.
The machine is provided with a "Quick stop"
function. Have the machine repaired if braking time
is clearly lengthened.
Wear ear protectors. Exposure to noise can
cause loss of hearing.
Danger of injury from the sharp edges of the blades.
Never touch the blades. Wear protective gloves.
Always wear protective goggles, gloves, and
suitable shoes when working with the hedge
trimmer.
Always hold the machine with both hands and stand
firmly on the ground. Pay attention to obstacles in
the working area - danger of tripping. Keep the
cutting blade well away from the body.
Plugs and couplings of extension cables must be
splash-proof.
ENGLISH en
7