Publicidad
Idiomas disponibles
Idiomas disponibles
Erasing already recorded tapes
You can erase a cassette tape by setting the recording level to the
minimum value (0) and recording silence .
After setting the REC LEVEL (recording level) knob to 0, follow the
recording procedures (page 18) to record .
(Skip recording level adjustment in step 3 . Setting the recording
source is also unnecessary . )
20
Recording to cassette tapes (continued)
Creating silences (REC MUTE)
Erasing unnecessary parts and creating spaces between songs while
recording is possible .
If you press the REC MUTE (record muting) button when recording
or in recording standby, the unit records no signal for about 4 sec-
onds and then enters recording standby .
To create a blank of more than 4 seconds long
Hold down the REC MUTE (record muting) button for the desired
length of time .
Silence is recorded while you press the button . When you release
the button, the unit enters recording standby .
To create a blank of less than 4 seconds long
Press the PAUSE button within 3 seconds of pressing the REC MUTE
(record muting) button .
This stops the recording of silence and puts the unit in recording
standby .
Press the PAUSE button to resume recording .
blinks on the display while recording is muted .
o
Publicidad
