KREAFUNK toCHARGE mini3 Manual De Operación página 6

EN Safety and maintenance instructions
1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this
operation manual should be retained for future
reference and must be followed at all times.
3. Keep the product away from heat sources such as
radiators, heaters or other appliances that produce
heat.
4. Place ToCHARGE mini 3 in a stable position to avoid fall
and cause damage or personal injury.
5. Do not expose the product to direct sunlight for longer
periods. High temperatures may shorten the life of the
product, destroy the battery and distort certain plastic
parts.
6. Do not expose the product to extreme cold as it may
10
damage the internal circuit board.
7. Rechargeable batteries have a limited number of
charge cycles. Battery life and number of charge cycles
varies by use and settings.
8. Avoid liquids getting into the product.
9. Do not throw with or stamp on the product. This may
damage the internal circuit board.
10. Do not try to disassemble the product. This must only
be done by a professional.
11. Do not use concentrated chemical products or
detergent to clean the product.
12. Keep the surface away from sharp things, as these may
cause damage to the plastic parts.
13. Use 5V / 1A power supplies only. The connection of
power supplies with higher voltage may lead to severe
damage.
11