Publicidad
Idiomas disponibles
Idiomas disponibles
Releasing: Press the release button and pull the battery out in the direction. Installation: Place the battery in place and
press the switch in the direction shown in the scheme (Fig. 4). Ensure that the battery cannot be separated without
pressing the switch.
Fig. 5. Installation scheme Of hooks for the power cord.
II. Operation guide
Electrical controller (remote control):
1. Emergency Stop Button (Emergency Stop)
The emergency stop button interrupts and turns the power on, causing the engine to stop immediately in an emergency.
Fig. 6. Emergency Stop Button operation scheme, positions A and B.
Pressing the Emergency Stop button (red button) (Fig. 6A) will stop the engine. To restore the engine to normal operation,
turn the button (Fig. 6B) clockwise to unlock the device. Lifting and lowering the boom are simple and is done using the
above pilot / controller. Suspend the remote control after using or adjusting the boom height in a safe and easily accessible
place near the driving handle.
NOTE: When the device is not used for more than 3 days, press the Emergency Stop Button to maintain longer battery life.
2. Electrical failure - 'up' and 'down' buttons:
Up Key
Down
Key
Fig. 7. Button location, up and down
Use the 'up' or 'down' arrow keys (Fig. 7) to bring the motor to its default position if the controller fails or there
is no controller handle.
3. Controller support:
DMI-F-04_Annexe 3_Notice 1.0 RAJOUTER CODE ERREUR
15
Publicidad
