Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Control panel
1
ON / OFF
2
START / PAUSE
Press the button to start or pause the drying cycle.
3
OPTIONS
These buttons are configured to add special functions.
4
DISPLAY
The display shows the settings, estimated remaining programme time and status messages of
your tumble dryer.
5
PROGRAMMES
Different drying cycles can be selected according to the user's needs and the type of laundry to
be dried.
Options for special functions
Programmed start
This function allows you to delay the start of the drying programme for up to 24 hours. When this pro-
gramme is started, the time starts to decrease on the display and the programmed start icon flashes.
1. Load the laundry and make sure that the door of the dryer is closed.
2. Press the (On/Off) button and then use the programme selector knob to select the desired program-
me.
3. You can also select the (Wrinkle Control) or (Signal) function according to your needs.
4. Press the (Delay) button.
5. Press the (Delay) button repeatedly to select the desired delay time.
6. After pressing the (Start/Pause) button, the dryer is ready for operation. The drying procedure will be
performed automatically when the delay time is over.
7. If you press the (Start/Pause) button again, the delay function will be paused.
8. If you want to cancel the function, press (On/Off) button.
5
4
3
38
English
1
2
infiniton.es
Publicidad
