Tascam BD-MP1 Manual Del Usuario página 18

Settings
On the Settings screens, which include the General Settings, Display Settings, Audio Settings and System Information screens, settings
can be made and information checked, for example.
While the Settings icon is selected, press the ENTER button to show icons for the various settings.
To move between menus, confirm settings and execute items, use the shift* functions of buttons on the unit or use the cursor and
ENTER buttons on the remote control. (These explanations will primarily use remote control operations.)
* To move the cursor and confirm/execute using the unit, press the HIDE/MENU [SHIFT] button with the desired shift function (shown
below the button with light characters on a dark background) at the same time.
Basic remote control functions
p To exit a folder or subfolder, press the l cursor button repeatedly to return to the starting screen.
p Press the HOME button to return to the HOME screen.
p Press the RETURN button even during an operation to return to the previous screen.
p In the list of settings below, the underlined setting items are the defaults.
General Settings
System
Function
Screen Saver
HDMI CEC
Disc Auto Upgrade
Load Default
Upgrade
Easy Setup
18
TASCAM BD-MP1
Options
On/Off
On/Off
On/Off
More...
Disc/USB Storage
More...
Explanation
Turn the screen saver on/off.
If "On" is selected, the following functions become enabled when
nothing is playing back or when playback is stopped or paused.
p A screensaver will appear after about 3 minutes without
operation.
p The unit will automatically turn off after about 10 minutes
without operation.
When an HDMI cable is used to connect a device such as this unit
that supports HDMI CEC to a TV that supports HDMI CEC, this
function allows the remote control to link operation of both of
them.
(When off, only the unit will respond to the remote control.)
If an upgrade disc is loaded into this unit, upgrading will occur
automatically.
This function restores the various settings stored in the backup
memory of the unit to their factory default values.
Use to upgrade the unit firmware.
(Selection of upgrade media is possible.)
The following settings can be made easily using a setup wizard:
p Use the General Settings items to make more detailed settings,
including language, monitor resolution and monitor aspect
ratio.