Tascam BD-MP1 Manual Del Usuario página 24

Making connections
This is an example of connections with the unit.
Precautions before making connections
p Carefully read the operation manuals of the devices to be
connected and then connect them correctly.
p Before making connections, turn this unit and all equipment
to be connected off (standby).
Mixer, recorder, amp, etc.
ANALOG
IN
(UNBALANCED)
L R
R L
ANALOG IN
(BALANCED)
Mixer, recorder, amp, etc.
Installing rackmount years
The included rackmount ears must first be attached before mounting this unit in a rack.
p Refer to the illustration below when attaching them.
24
TASCAM BD-MP1
To 7.1 sound system
DIGITAL IN
TV, display, etc.
p Install all connected devices, including this unit, so that they
are powered from the same line. When using a power strip
or similar device, be sure to use one that has high current
capacity (thick cable) in order to minimize fluctuations in
power voltage. Moreover, do not bundle or wrap power
cords.
p Connect cable types correctly. (Be careful not to insert cables
into the wrong connectors or with the wrong orientation.)
USB flash drive
HDMI IN
Network router, etc.
NOTE
i A Phillips screwdriver is necessary for attachment.
i The attachment holes in the included rackmount ears are
elongated, allowing adjustment so that the unit does not
stick out of the rack when attached.
Computer