GB
ENGLISH
MAINS CONNECTION
DANGER!
Operation is only allowed with a safety switch against
stray current (RCD max. stray current of 30mA).
• Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to
connect to sockets without an earthing contact as the
design conforms to safety class II.
• Only plug-in when machine is switched off.
• Do not use the appliance in bad weather, especially
when there is a risk of storm.
MAINTENANCE
DANGER!
Unplug the machine before any work on it. Wait
until all rotating parts have stopped and the
appliance has cooled down.
• Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never
clean the machine and its components with solvents,
flammable or toxic liquids. Us only a damp cloth making.
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
16
WARNING
WARNING! Electric shock! There is a risk of an injury
caused by electric shock!
Never operate the apparatus if a cable, the mains cord or
plug are damaged.
Insert the plug of the electrical cable in a socket of suitable
shape, voltage and frequency complying with current
regulations.
Handle the cord carefully. Hold the plug when unplugging
the tool. Never use the cord to carry the apparatus. Keep
cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords
increase the risk of electric shock and may create a fire.
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less
than 1.5 mm
. Use of extension cables of different
2
length and cross-section and also of adapters and
multiple sockets should be avoided. When operating
a power tool outdoors, use an extension cord suitab-
le for outdoor use.
• Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries
of the user. The manufacturer will not be liable for any
such damage.
• Please contact our service department if you need
accessories or spare parts.
• Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
• Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Please dispose of the device itself at an according collec-
ting/recycling point. By doing so, plastic and metal parts
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.