Dosing Pump - Dupla MARIN P 4 Manual De Instrucciones

Dosing Pump

Thank you for purchasing the Dosing Pump P 4.
These operating instructions are part of the product. They include important information on commissioning and operation.
Keep these operating instructions for future reference.
Scope of supply:
4 channel dosing pump with integrated control
Operating instructions
12 V power supply
1. Installation:
Connect the power supply unit to the Dosing Pump P4 and then the power supply unit to a mains socket. In the event of a
poser supply failure, an internal memory of the dosing pump prevents the loss of data over a longer period of time.
2. Programming:
The dosing pump is easy to program using the six keypad buttons next to the display.
If no buttons are pressed within 60 seconds, the device automatically switches back to the basic function.
Date: 2014-09-18
Time: 12:00:00
Dosing Pump P 4
Programming the time:
Press the Menu button to access the programming level.
Set DATE & Time <
Set Program
The symbol indicates which programming level you have currently selected. Use the  or  button to navigate bet-
<
ween the programming levels. Confirm DATE & Time by pressing the Menu button.
Set New DATE
Date: 2014 - 00 - 00
You can now use the  and  buttons as well as the  and  buttons to set the current date.
After you have set the date, press the Menu button to access the programming level for the time.
Set New Time
Time: 12:00:00
6
Dohse Aquaristik GmbH & Co. KG · 53501 Gelsdorf · Germany · T. +49 2225 94150
Menu
Esc