Publicidad
Idiomas disponibles
Idiomas disponibles
USER'S MANUAL. PROMAX-10
Average detector
Span 30 MHz
Span 15 MHz
Span 5 MHz
Span 1 MHz
TRANSIENT DETECTOR
Detection threshold
Detection range
Readout
AUDIO
Demodulation
Output
POWER SUPPLY LNB
Input
Output
Voltage
Current
Protection
POWER SUPPLY
NiMh battery
Low battery indication
Autonomy
Automatic power-off
Battery charge
Equipment consumption
Mains to charger adapter
ENVIRONMENTAL CONDITIONS
This equipment could be used on the following environmental conditions, in these
conditions the specifications could also be applied:
Altitude
Temperature range
Maximum relative humidity
MECHANICAL FEATURES
Dimensions
Weight
04/2004
280 kHz.
140 kHz.
50 kHz.
10 kHz.
From 20 to 60 dBµV in steps of 1 dB.
From 5 to 100 MHz maximum.
Number of detected transitory in the measuring
time. Present detected level and maximum detected
level in the time of the measurement.
AM / FM / LEVEL (variable tone according to the
signal level).
Internal speaker / external headphones.
By external power supply.
By input signal connector.
24 V nominal (25 V max.).
500 mA max.
Current limiter.
7.2 V – 1.4 Ah.
Graphic indication on the display:
Approximately 3 hours (30 % on / off excepting
measurements of MER / BER).
Power-off after approximately 10 minutes of non-
use.
By fast internal charger.
13.5 W.
230 V / 50-60 Hz / 13.5 V DC minimum (EUROPE
and other countries).
Up to 2000 metres.
From 5 °C to 40 °C.
80 % (up to 31 °C),
decreasing lineally up to 50% at 40ºC.
70 W (90 on the display) x 218 H x 50 D mm.
825 g. (including battery and holster).
Page 5
Publicidad
