Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
WATER DISPENSER
Before using the water dispenser for the first time, remove and clean the
water tank located inside the refrigerator compartment.
Remove the water tank. Detach the top cover and wash and clean both the tank
and the cover.
After cleaning, reposition water tank, cover as below:
Clean the dispenser lever outside the refrigerator door.
Filling the water tank
Open the small lid in the top of the tank balcony.
Fill the water tank with drinkable water up to the 2L line.
Close the lid. Ensure it is firmly shut.
Dispensing water
Push the dispenser lever gently with a glass or container. To stop
the flow, pull the glass away from the lever.
9
INSTALLATION
Before reversing the door, please be prepared below tools and material:
straight screwdriver, cross screwdriver, spanner and the components
included in the poly bag:
Close upper door, take out the screw from the top hinge covers by cross screwdriver.
Take off hinge cover, then unscrew top hinge and take off upper door.
Unscrew from the middle hinge by cross screwdriver, then take off the lower door.
10
Publicidad
