Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL CHARACTERISTICS:
Type:
Dimensions:
Category:
Type of gas:
Type of cylinder:
Pressure:
Power:
Nozzle Diameter:
Ignition system:
Safety:
ASSEMBLY OF THE HEARTER ON THE GAS CYLINDER:
IMPORTANT: The assembly and disassembly of the butane cylinder must be made outdoors and far away
from any other source of ignition, such as naked flames, pilots, electric fires and away from other people.
1) Remove the cap from the butane canister and position the heater over it vertically.
2) Screw the heater to the valve of the canister.
3) Turn the heater until the connection is complete.
Note: During the assembly process, it is very likely that a small amount of gas will escape from the gas
canister during the screwing in process.
Infrared Portable Heater
285 x 182 x 385 mm
I 3+
Commercial Butane
BUTSIR / CAMPING
Direct Pressure
Max. 2.8 kW
Min. 1.4 kW
Max. 200 g/h
Min. 100 g/h
0.59 mm
Piezo-electric
Atmospheric analyser
8
Publicidad
