Publicidad
Idiomas disponibles
Idiomas disponibles
IGNITING THE HEATER
1) Open the gas tap located on the front of the heater, rotating 1.5 turns in an anti-clockwise direction.
2) Turn the control knob to the ignition position (flame) and then press right down. Next push the piezo-
electric ignition located on the left side of the heater, until the pilot light ignites. Hold the control knob position
for 15-20 seconds until the pilot light stays alight.
3) Turn the control knob to the I position (minimum power) or the II position (maximum power) as required.
CHANGING THE BOTTLE:
Check that burners are extinguished before disconnecting the gas container.
Change the gas container/ canister outside and away from people.
1) Shut the gas off from the canister by turning the shut-off valve in a clockwise direction.
2) Unscrew the heater from the gas canister by turning in an anti-clockwise direction.
Check the seals before connecting a new gas container to the appliance.
IMPORTANT: Now is the moment to check if the gasket is in good condition.
9
Publicidad
