Publicidad
Idiomas disponibles
Idiomas disponibles
PRESET Stations
To set the PRESET stations:
1. Tune to desired station.
2. Press and hold the PRESET button until the
PRESET indicator on the display begins to flash.
3. Use the
buttons to select the PRESET
location for the station. Nine locations (1-9) are
available.
4. Press the PRESET button to save the location.
To tune to a PRESET station:
Press and release the PRESET button to step
through the PRESET stations.
Using Bluetooth
To enter the Bluetooth
• If no Bluetooth
device is connected, Bluetooth
®
pairing will begin automatically and the
flash on the display.
• The radio will continue to search for a signal for
3 minutes.
• To manually pair a device, press and hold the
Bluetooth
button until the begins
®
• While the
is flashing, select "M18 Jobsite Radio"
on the Bluetooth
capable device.
®
• Once the device has successfully paired with the
radio, a tone will play and the
on the radio's display.
Connecting
To enter the Bluetooth
When the radio locates a paired Bluetooth
the
will be shown on the radio's display.
If connection is lost between the radio and the
Bluetooth
device, the radio will try to reconnect
®
automatically for up to 3 minutes.
Controlling
When streaming music through to the radio via a
Bluetooth
device, use the
®
pause the music. Use the
through the tracks.
®
mode, press the
®
Pairing
to flash.
icon will be shown
mode, press the
®
button to start and
buttons to move
WARNING
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the battery pack, charger, or tool, except as pro-
vided in these instructions. Contact a MILWAUKEE
service facility for all other repairs.
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
button.
of parts, or any other condition that may affect the
tool operation.
If the tool does not start or operate at full power with
®
icon will
a fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work prop-
erly, return the tool, charger and battery pack, to a
MILWAUKEE service facility for repairs.
WARNING
your tool, battery pack or charger in liquid or
allow a liquid to flow inside them.
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
button.
ing agents and solvents are harmful to plastics and
device,
®
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
WARNING
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
5
MAINTENANCE
To reduce the risk of injury, always
unplug the charger and remove the
Maintaining Tool
To reduce the risk of personal in-
jury and damage, never immerse
Cleaning
Repairs
ACCESSORIES
Use only recommended accesso-
ries. Others may be hazardous.
(1.800.729.3878)
www.milwaukeetool.com
Publicidad
