Samsung WF56H9110C Serie Manual Del Usuario página 25

Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
NORMAL, DEEP CLEAN, HEAVY DUTY, BEDDING, WHITES, SANITIZE, ALLERGEN,
RINSE+SPIN, ECO COLD, QUICK WASH, TOWELS, PERM PRESS, WOOL, DELICATES or
ACTIVE WEAR. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the start/pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, you can add laundry to or remove laundry from the wash.
1. Press the Start/Pause button to unlock the door.
2. Add or remove laundry.
3. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
(USER)WF56H9110-03404B-10_EN.indd 25
Pre-wash is only available when you select the NORMAL, DEEP CLEAN, HEAVY DUTY,
BEDDING, WHITES, SANITIZE, ALLERGEN, TOWELS, ACTIVE WEAR, PERM PRESS or
ECO COLD cycles. It is only necessary if your clothing is heavily soiled.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
English _25
2018/1/8 11:23:15