MOTOAIRBAG S164S Manual De Instrucciones página 19

MOTOAIRBAG S164S – S11 (MAB v3 – MAB v2.0 Plus – MAB vZero Plus)
This manual:
■ is an integral part of the product and must be read carefully in order to use the product
correctly, in accordance with the essential safety requirements;
■ is written in accordance with the law and contains the technical information necessary to
carry out all procedures correctly in safe conditions;
■ must be stored with care (e.g. in a transparent, watertight casing to prevent deterioration) and
must accompany the product throughout its life, including any changes in ownership. The
manual must be stored in a protected place but easy for personnel to access during use.
Unless otherwise agreed when ordering, the manufacturer shall provide the purchaser with
a hard copy of this manual. In case of loss, deterioration or need for additional copies, the
purchaser and/or user can request it from D.P.I. Safety s.r.l. by indicating the data on the
product identification plate. The price in force at the time of the request will be applied to
the additional copies.
■ is originally written in Italian. No responsibility is taken for translations into other languages,
not conforming to the original meaning and validated by D.P.I. Safety s.r.l..
■ was written by D.P.I. Safety s.r.l.. Any use of texts and illustrations in this publication must
be expressly authorized by D.P.I. Safety s.r.l.
1.3 WARNINGS AND LIMITATIONS OF USE (TEXT IN COMPLIANCE
WITH EN1621/4:2013)
■ No protector can guarantee complete protection from injury.
■ The protector may not provide protection in all circumstances, for example:
■ During the first impact between the motorcycle and the obstacle.
■ In the event of an accident without motorcyclist - motorcycle separation.
■ The protector is compatible with EN1621/1 and EN1621/2 certified protections as long as
you wear them under the protector.
■ Always fasten the front zipper or buckle. Otherwise, the airbag system may not remain in
place during operation.
■ Do not tamper with any components of the protector in order not to alter its proper functioning.
■ The protector will only operate if the activation cable is connected to the D-ring belt or the tower
on the motorcycle.
■ Connect the activation cable only to the supplied D-ring belt or to the tower and not elsewhere.
■ Do not wear anything over the protector (e.g. backpacks or bags).
■ MOTOAIRBAG
®
■ Do not store sharp or pointed objects in the pockets of the textile part.
■ Do not tamper with or modify the fastenings that ensure the closure of the zones that house
the MOTOAIRBAG
■ Use the MOTOAIRBAG
atures between 0 ° C and 45 ° C.
can be worn by both rider and passenger.
airbag system.
®
S164S - S11 (MAB v3 - MAB v2 Plus - MAB vZero) at temper-
®
EN
19