MOTOAIRBAG S164S Manual De Instrucciones página 23

MOTOAIRBAG S164S – S11 (MAB v3 – MAB v2.0 Plus – MAB vZero Plus)
3
- D-RING BELT ASSEMBLY
The protector may not work properly if instructions are not followed carefully.
If you have any questions, contact the Manufacturer or authorized Dealer.
3.1 HOW TO CONNECT MOTOAIRBAG
VIA D-RING BELT SYSTEM
■ When first used, fit the D-ring belt around the motorcycle seat following the in-
structions.
■ The anchor point must be created behind the rider sitting on the motorcycle seat.
When the passenger wears MOTOAIRBAG
must be positioned on the saddle behind the seated passenger. Fig. 26-27
1 - Lift the motorcycle seat (Fig. 1);
2 - Fit the belt around the seat (Fig. 2);
3 - Fasten the buckle (Fig. 3) and tighten it (Fig. 4-5) making sure that it is properly tightened.
Before moving:
■ Check that the seat is properly secured to the motorcycle.
■ Check that the D-ring belt on the seat or the tower on the motorcycle is not damaged.
■ Connect MOTOAIRBAG
manual.
■ Check the FAST LOCK is free to slide
® may not work properly if instructions are not followed carefully. If you have
MOTOAIRBAG
any questions, contact the Manufacturer or authorized Dealer.
WHEN CHOOSING THE BELT, MAKE SURE THAT IT COMPLIES WITH
ITS INTENDED PURPOSE ( REFER TO THE DATA PROVIDED BY THE
BELT MANUFACTURER ) .
The company accepts no liability for any damages/consequences resulting from the use of a
belt that does not comply with its intended purpose.
to the motorcycle (Fig. 24) following the instructions in this
®
TO THE MOTORCYCLE
®
, he must use his own strap which
®
EN
23