Imetec E0806 Instrucciones De Uso página 11

• Insert the control socket (5) into the socket (6) to connect the temperature adjustment
control to the heating pad.
• Insert the plug in the socket.
• Place the heating pad on the part of the body that is to be heated.
SWITCHING THE APPLIANCE ON AND SELECTING THE TEMPERATURE
• Press the ON/OFF
• The display (1) will light up and the temperature will be automatically set to position 5.
• Select the desired temperature (from 1 to 5) by pressing the temperature selector
until the relative number lights up on the temperature display (1).
• Select temperature from 1 (min) to 3 (max) for continuous use.
AUTOMATIC SHUTDOWN
• The heating pad is provided with an automatic switch-off system. The stand-by display
(2) lights up after 3 operating hours to indicate that the product has switched off
automatically.
• Switch the appliance back on by pressing the ON/OFF selector (4) and select the desired
temperature once again.
SWITCH-OFF
• Switch the heating pad off by pressing the ON/OFF selector (4) when it is no longer used.
• Remove the plug from the socket.
The heating pad is washable. Refer to the washing symbols on the heating pad label for the
washing instructions.
Wash at 30°C.
Tumble-dry at less than 40°C.
Do not dry-clean.
WASHING INSTRUCTIONS
Always disconnect the plug and the control socket (5) from the socket (6) before cleaning.
slightly push down the plug to remove it easily
MACHINE WASHING
• The heating pad can be machine washed at 30°C with a normal cycle.
• Only the gentle spin cycle is to be used. DO NOT set an additional spin cycle.
• The lining and the cushion can be machine washed at 40°C with a normal cycle.
• Use only the gentle spin cycle. DO NOT run an additional spin cycle.
DRYING
• Set the dryer at a low temperature.
• Do not apply pegs on the electrical parts when hanging the heating pad to dry in order
(4) selector to switch the heating pad on.
CLEANING AND MAINTENANCE
Do not bleach.
Do not iron.
Wash at 40 °C (only the cushion and the
lining)
GB
(3)
9