Tabla de contenido
Publicidad
GB: Operating Instructions
Transport protection
Remove the transport protection between the load dish and the upper part of the housing.
Battery
Two AAA batteries are included. The battery compartment is on the base of the scales. Please note
polarity marking. Before using the scales remove the plastic protection.
Positioning the scales
Please ensure that the scales is in a horizontal position.
Weighing ( )
After switching on the scales with the „
zero appears. Then place the weight on to the scales and read off the weight.
Net weighing (TARE)
Place an empty container (i.e. first weight) on to the scales and then subtract this weight by pressing
the „
/ TARE" key until zero appears. Fill the container (i.e. add second weight to the scales). Only the
additional weight is indicated in the display.
Switch off ( )
Press the key „
/ TARE" until the display disappears. Automatic switch-off will occur after approx. 1,5
minutes, if no change of weight occurs in this time.
Switching the weight units g, lb, oz or ml
The scales can show the weight value in g, lb, oz or ml. Press the "Unit" button when the scales is turned
on. Press the key again to change the weighing unit.
Explanation of the special symbols
1. Switching on
After pressing the „
clearly shown on the display. Zero indicates that the scales are ready for operation.
2. Negative value
Press the „
/ TARE"- key once again.
3. The indication of the weight is not stable
If the display shows "unSt", the scale is not placed on a steady surface.
4. Overload
If the weight exceeds the total weighing capacity of the scales, „Err" appears in the display.
5. Energy Supply
If „Lo" appears on the display, the batteries need to be changed.
This device corresponds to the requirements stipulated in the EC-directives 90 / 384 / EWG.
Note: Extreme electromagnetic influences e.g. radio unit in the immediate vicinity may affect the
displayed values. Once the interference has stopped, the product can once again be used normally. The
scales is not legal for trade.
/ TARE" key, „8888" appears in the display. Please wait until
/ TARE"- key all symbols appear. You can check whether all segments are
Publicidad
Tabla de contenido
