ASSEMBLY INSTRUCTIONS
4. Place the backplate of fixture body (B) over the
mounting screws on crossbar assembly (A). Place
caulk (not included) into threads of mounting balls
and attach them to the mounting screws. Hand
tighten until snug.
5. Install bulb (E) into socket of fixture body (B).
6. Thread the glass shade (D) into fixture body (B).
Hand tighten until snug. Then, attach cage (C) to
fixture body (B) by placing the pins in the top edge
of cage (C) into the slots on fixture body (B). Rotate
cage (C) until it is secure.
4
Mounting Screw
Outlet Box
5
6
5
A
Mounting Ball
B
E
B
D
Pins
C
B