LG LRDN2272 Serie Guía De Usuario página 16

REMOVING, REVERSING AND REPLACING
REFRIGERATOR DOORS (OPTIONAL)
NOTE: See the Parts and Features section on pages 9-10
to match your model.
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat-head screwdriver, 10mm
open-end wrench, flat 2-inch putty knife.
IMPORTANT: Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECT ION
(when converting from the left-opening type to right-
opening type)
1. Removing Refrigerator Door
Remove the top hinge cover (1).
Remove the 3 screws and lift of f the top hinge (2).
Lift the Refrigerator door (3) slightly and remove it.
Pry off the cover (4) using a slotted screwdriver and
attach it on the right.
Loosen the screw (5), remove the stoppers (6) and
attach them on the left (on the opposite side).
Loosen the pin (8) and remove it.
Lift off the washer (9).
Pry off the cover (7) using a slotted screwdriver and
attach it on the right.
2. Removing Freezer Door
Lift the door (10) slightly and remove it.
Loosen the 2 screws (11), the 2 screws (12), and lift
off the middle hinge (13).
Take off the base grille (14).
Remove the cap (15) and attach it on the right.
Loosen the 2 screws (16), remove the bottom hinge
(17), and attach on the right.
Loosen the 2 screws (18), remove the bottom hinge
(19), and attach on the left.
Loosen the 2 screws (20) and attach the stopper (21)
on the left side of the base.
REFRIGERATOR INSTALLATION
16