Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
*
STEP 4 Leveling your washer
24 English
WA3200T_DC68-03850D-02_EN.indd 24
WA3200T_DC68-03850D-02_EN.indd 24
A
A
NOTE
Connect the hose guide (A) within 3~5
in (7.6~12.7 cm)* from the end of the
drain hose. If the drain hose is extended
beyond the end of the hose guide, mold
or microorganisms could spread inside the
washer.
NOTE
The drain hose can be installed to a 96
in (245 cm) maximum, but the draining
capability can be reduced at this height.
It can cause the washer to have an odor
because of remaining water in the drain
system.
See if the washer is level by checking the
position of the tub:
1. Slide the washer into position.
2. Open the lid of the washer, and pour
the water into the tub to just below the
pulsator level.
2020-12-02
2020-12-02
2:36:02
2:36:02
Publicidad
