Descargar Imprimir esta página

Panasonic Lumix H-X1025 Instrucciones De Funcionamiento página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Names and Functions of
Components
1
2
1
Lens surface
2
Aperture ring (clickless)
Adjusts the aperture value when you set the digital
camera to Aperture-Priority AE mode or Manual
Exposure mode.
You can set the aperture value on the digital
0
camera if you set the aperture ring to the [A]
position.
20
DVQX1834
(ENG)
5
6
7
3
4
3
Focus ring
Switches between AF (auto focus) and MF (manual
focus) by sliding the focus ring forwards or
backwards. (l 22)
Rotates the focus ring to focus when set to MF.
4
Zoom ring
Zooms to telephoto or wide-angle.
5
Lens fitting mark
6
Lens mount rubber
7
Contact points
Note
There may be some vignetting at the edges of the
0
screen when recording using the flash of the digital
camera. We recommend using the wide panel on an
external flash.
There may be differences in focus when you use zoom
0
after focusing. Focus again.
If the sound of AF operation bothers you during video
0
recording, it is recommended to set to MF.
The aperture can be adjusted with the aperture ring
0
only when a Panasonic digital camera is attached to
the lens. (As of May 2019)

Publicidad

loading