7.2. Horizontal variant
Connect the two loudspeakers as shown in the Figure.
Check that the plug connection on one loudspeaker fits securely into the plug
connection on the other loudspeaker.
Holding one loudspeaker firmly, rotate the other loudspeaker in the direction of
the closed padlock symbol.
Glue the rubber feet to the long side of the soundbar on the underside, as
shown above.
Position the soundbar on a stable, level surface close to a power socket. Make
sure that the soundbar cannot fall.
7.3. Wall-mounted soundbar
Before mounting on a wall, check that the wall has the required load
bearing capacity. Medion AG shall not be liable for damage resulting
from incorrect or non-professional mounting.
156
First connect the two loudspeakers as shown in „7.2. ".