ARDES AR4C03T Folleto De Instrucciones página 15

Instructions for use
GB
SUPPORT ASSEMBLY
Turn the appliance over, rest the plastic supports in place matching
the holes with those on the appliance. Then fix the supports with the 2
3.8x14mm screws.
The appliance can emit both cool air as well as hot air, depending on the
appliance setting.
Before connecting or disconnecting the appliance, make sure that all the
switches are in the OFF position.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch in the desired position and turn the temperature switch
(3) clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The appliance is also equipped with a daily timer that allows the user to
set the automatic turn-on and turn-off of the appliance.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
OPERATION WITH TIMER (AR4C03T only)
To operate the appliance continually, position the TIMER switch (1) on
"I", while for programmed operation it has to be positioned on "CLOCK".
The TIMER works only if the plug is inserted in the power outlet.
To program the appliance, position the arrow (2) on the current time and
select the teeth (3) (pushing them outwards) corresponding to the period
in which you want the appliance to operate.
Make sure that the appliance has cooled down completely before storing
it in the box.
3
2
1
15