7
Press the Power button to turn on the
washer.
8
Press and hold the Spin button for 3 seconds
to operate Spin Only cycle for draining and
spinning.
9
Press the Start/Pause button and check that
the water fills properly.
When the Drain Hose is Frozen
1
Pour hot water in the washer tub and close
the lid.
2
Wait for 1 - 2 hours.
3
Press the Power button to turn on the
washer.
4
Press and hold the Spin button for 3 seconds
to operate Spin Only cycle for draining and
spinning.
5
Press the Start/Pause button to make sure
the water drains.
MAINTENANCE
39