TECshow NAVIGATOR EXPERT RDM Manual De Usuario página 22

4.
The DMX channels are combined in 2 groups
(pages) of 8 channels each. If necessary, use the
PAGE UP and PAGE DOWN button to switch be
tween the channels groups and repeat the steps
until the desired values are assigned to all chan-
nels. The control LEDs above the buttons indicate
which channel group is selected.
5. Color mixtures via the HSV function can be en-
tered by pressing the PGM DOWN/HSV button for
3 seconds (LED lights). Then set the desired values
with the 6/H, 7/S and 8/V fader.
6. To delete all DMX values adjusted keep the CLEAR
button pressed for 3 seconds. To confirm
the deleting procedure, all LEDs of the controller
flash three times.
Adjusting Motions and Color Effects
The built-in effect generator allows creating 9 different
patterns for pan and tilt movement of moving heads or
scanners as well as 7 additional color effects for LED light
effect units. The effects can be saved together with other
DMX values in a scene.
P. 22
NAVIGATOR EXPERT RDM
ENGLISH VERSION