System Settings - TECshow NAVIGATOR EXPERT RDM Manual De Usuario

The following adjustments are possible:
Display
01. Patch fixture
02. Reset factory
03. Delete all Fixture
patch
04. Fade mode
05. RDM DMX Address
setup
06. Data backup
07. Data load
08. Send fixture Update
file
09. Black-out mode
10. Fog machine
Function
DMX configuration
Reset to factory settings
Delete all DMX assign-
ments
Fade function
RDM DMX address as-
signments
Data backup
Data import
Firmware update
Blackout function
Fog machine

11. System Settings

This Mode Allows You To Change Im-
portant System Settings For The Con-
troller.
Calling the System Settings
1. Keep the button MENU for 3 sec-
onds to call the system settings.
- The display indicates the first menu
item "01.Patch fixture".
2. Turn the PAN wheel to browse the
menu items. Press the ENTER button
to select the desired menu item.
3. Turn the PAN wheel to change a
setting and confirm with ENTER.
4. Shortly press the ESC button to
abort the settings procedure and re-
turn to the main menu level.
5. To save your settings and exit the
system settings, keep the MENU but-
ton pressed for 3 seconds.
P. 31
NAVIGATOR EXPERT RDM
ENGLISH VERSION