Lenco SB-080BK Manual De Usuario página 10

AUX Mode
1. After switching on the soundbar, change to AUX input mode by pressing the 'input'
button on the remote control until [AU] is shown on the display.
2. Plug in the 3.5mm AUX cable to the AUX connector on the soundbar and start
playing from the connected music device.
USB Mode
The USB port can be found on the right side of the soundbar. You can use USB memory
sticks with music files in MP3 format.
1. Plug in the USB drive into the USB port.
2. The music files on the USB drive will play automatically and the display will show
[US]
3. You can use the remote control to play/pause/stop and play next/previous track.
HDMI Mode
1. The Soundbar supports HDMI with Audio Return Channel (ARC). lf your TV is HDMI
ARC compliant, you can hear the TV audio through your soundbar by using a single
HDMI cable
2. Connect a high speed HDMI cable from the HDMI TV (ARC) connector on the
soundbar to the HDMI ARC connector on your TV. The HDMI ARC connector on the
TV might be labelled differently. (HD) will display on the soundbar
3. On your TV, select source as HDMI (ARC) mode. For details on the HDMI (ARC)
mode, consult your TV user manual.
Optical Mode
Using an optical cable, connect the OPTICAL connector on the Soundbar to the
OPTICAL OUT connect on the TV or other device. (OP) will display on the sounbar.
8