TREVIDEA Girmi ML70 Manual De Usuario página 11

pour liquids after switching on.
If the appliance operates when empty, the safety device
shuts it down automatically to prevent any damage.
Once finished, unplug unit and wait for cooling of each
part before storing or cleaning.
Don't immerse appliance in water or liquids. In any case,
avoid splashing of water or liquids.
Always close the lid before each operation
Put the appliance on stable shelves and floors.
Do not insert any metal object into the product. Remove
the whisk, only after having turned off the appliance and
unplugged it from the main power outlet.
To avoid milk to stuck on container, at the end of each
use, immediately rinse the container with water.
DESCRIPTION ML70
1 Lid
5 Function light
9 Plug and cord
OPERATING THE UNIT
2 accessories are included:
- A stainless steel whisk to froth.
- A plastic mixer to mix beverages without mounting.
Mount one of the accessories on the bottom of the container (7), according to the preparation you want to
make. Place the container (7) on the heating plate (8).
Pour milk or chocolate (or other beverages) in the container (7), making sure to stay within the limits of the
capacity which are indicated inside the container (MIN 150ml – MAX 250ml).
WARNING: if you exceed the maximum specified level, the milk may spill out during use.
- FUNCTION 1: Pressing one time the button (4) the light (5) turns red to:
o
Heat and froth milk (with the whisk 5).
o
Heat and froth milk or liquids (with the mixer 10).
o
Heat milk or liquids (without accessories).
- FUNCTION 2: Pressing two times the button (4) the light (5) turns blue to:
o
Froth fresh milk, without heating it (with the whisk 5).
o
Mix liquids, without heating them (with the mixer 10).
- Once finished one of the above operations, the appliance will turn off automatically.
- You can stop the machine anytime, by simply pressing again the operation button (4).
To avoid the milk to stuck on container, at the end of each use, immediately rinse container with water.
CLEANING -
Unplug the unit and wait until the complete cooling down of each part before
starting cleaning operations.
Do not immerse the base of the vessel and into the water. In any case, avoid splashing water or other liquids
from reaching those parts. Do not use abrasive cleaners, solvents, or strong detergents to clean the exterior
and the base of the product, but clean with a cloth dampened with warm water. Container and accessories
2 Whisk
6 Handle
10 Mixer (under the base)
3 Main body
7 Glass container
4 Operation button
8 Heating plate
10