Publicidad
English
Installation – ¾"
Requires ¾" female threaded pipe fitting recessed ⅜"
behind surface of finished wall.
(1) Wrap the mounting piece with Teflon tape.
(2) Install the mounting piece. Tighten using a ⁷⁄₁₆"
Allen wrench (not included).
⁷⁄₁₆"
(4) Install the spout. Tighten the screw using a mm
Allen wrench.
(3) Seal the wall around the
mounting piece using waterproof
sealant.
Failure to seal the wal may result
in water damage.
Publicidad
