Publicidad
FIAMMASTORE
9
10
F
11 - USE OF THE PRODUCT
EN
STANDARD OPERATION
The Control system key opens or closes the awning; taking your fi nger away from the button, the
movement stops. Do not put your hands in the mechanical parts of the awning, when the awning is
moving.
In case that the movement doesn't stop, you could indentify why the Microswitch doesn't work (because
is not connected or defective); in this case the lead bar will fi nish the operation until the closing and it will
trigger the protection fuse (that will safeguard the electrical system).
While closing of the lead bar automatically, do not insert your hands or objects that can hamper the
movement.
Pay attention even to non – visible objects (F.I. branches above the awning Fabric) that can hamper the
movement even before that the Microswitch takes action; in this case the protection fuse triggers and
safeguard the electrical system.
Once the fuse triggers, it must be replaced with an identical (Fuse T 4A L 250V). Never use a different
fuse. We recommend that you carry a spare fuse at all time.
In these cases, we always recommend that you contact the Service Centre.
MANUAL OPERATION
It is possible to close the awning by passing the 12V
operation (with the Control System); to do this,
please use crank handle E delivered as standard.
16
Publicidad
