Publicidad
Idiomas disponibles
Idiomas disponibles
USER MANUAL
2) REMOVING THE GRILL
For servicing or if you want to position your microphone closer the front grill of the cabinets can be removed.
The grill is fastened with Velcro pads. The first removal of the Grill can be a bit tough since it is firmly inserted
during production – subsequent removals will become easier. Pull the straps at the lower edge of the grill, pull
slowly with constant force and do not jerk. If necessary insert a screwdriver into the loop of the strap so you can
apply more force.
3) INSERTING/REPLACING SPEAKERS
To insert or replace a speaker carry out the following steps:
1) Remove the grill.
2) Lay the cabinet down on its back on a clean padded surface (use a blanket, carpet or similar to make sure the back
of the cabinet doesn't get any scratches and the jackplate is not strained).
20
EN
Publicidad
