Publicidad
Idiomas disponibles
Idiomas disponibles
4. LEVEL HEDGES (Figure I) – To obtain exceptionally
level hedges, a piece of string can be stretched along
the length of the hedge as a guide.
5. SIDE-TRIMMING HEDGES (Figure J) – Begin at the bottom
and sweep up.
WARNING
TO GUARD AGAINST INJURY, OBSERVE THE
FOLLOWING:
:
•
READ INSTRUCTION MANUAL BEFORE USING, SAVE
INSTRUCTION MANUAL.
•
CHECK THE HEDGE FOR FOREIGN OBJECTS SUCH AS
WIRE OR FENCES BEFORE EACH USE.
•
KEEP HANDS AWAY FROM BLADES.
•
KEEP HANDS ON HANDLES. DONʼT OVERREACH.
•
CAUTION: – BLADE COASTS AFTER TURN OFF.
•
DO NOT USE UNDER WET CONDITIONS.
•
DO NOT USE WITH DAMAGED EXTENSION CORD.
•
DO NOT UNPLUG OR STORE WITH SWITCH LOCKED ON.
DANGER: KEEP HANDS AWAY FROM BLADES.
CAUTION: BLADE COASTS AFTER TURN OFF.
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
TROUBLESHOOTING
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
7
I
J
Possible Solution
• Plug tool into a working
outlet.
• Replace circuit fuse.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product repeatedly
causes the circuit
breaker to trip,
discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at Black
& Decker Service Center
or Authorized Servicer
Publicidad
