Ninebot KickScooter F2 Manual Del Producto página 4

Item
Name
Model
Length × Width × Height
Product
Folded: Length × Width × Height
Net Weight
Max. Payload
Rider
Recommended Age
Required Height
Max. Speed
Theoretical Range [1]
Range at Max. Speed
[2]
Max. Slope
Traversable Terrain
Machine
Operating Temperature
Storage Temperature
IP Rating
Duration of Charging
Nominal Voltage
Max. Charging Voltage
Nominal Energy
Nominal Capacity
Battery
Charging Ambient Temperature
Battery Management System
Nominal Power
Motors
Max. Power
Input Voltage
Max. Output Voltage
Charger
Rated Output
Output Power
Tire Pressure
Tire
Tires
[1] Theoretical Range: Tested while riding with a full battery, 165 lbs (75 kg) load, 77°F (25°C), at the speed of 9.9 mph (16 km/h) on average on
pavement.
[2] Range under Max. Speed: Tested while riding with a full battery, 165 lbs (75 kg) load, 77°F (25°C), at the max. speed on average on pavement.
05
Parameter
Ninebot KickScooter F2 Pro
051203U
Approx. 45.6 × 22.4 × 49.3 in (1158.5 × 570 × 1252 mm)
Approx. 45.6 × 22.4 × 20.8 in (1158.5 × 570 × 529 mm)
Approx. 40.8 lbs (18.5 kg)
265 lbs (120 kg)
16+ years
3'11"–6'6" (120–200 cm)
Approx. 20 mph (32 km/h)
Approx. 34 miles (55 km)
Approx. 22 miles (35 km)
Approx. 22%
Most of the flat road conditions and Cobblestone road.
14–104°F (-10–40°C)
14–122°F (-10–50°C); recommended: 50–86°F (10~30℃)
IPX5
Approx. 8 h
36 V
42 V
460 Wh
12.8 Ah
32–113°F (0–45°C)
Over-heating, short circuit, over-current, over-discharge and
over-charge protection
450 W
900 W
100-240V～50-60Hz
42 V
41 V 1.7 A
70 W
42-48 psi
10-inch Self-sealing tubeless tires
3
Recommended Maintenance Schedule
To ensure safe riding, day to day care and regular maintenance are essential. You, the owner, have control and knowledge of
how often you use your scooter, how hard you use it and where you use it. It is the owner's responsibility to perform regular
checks and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance
schedule below.
Note: This maintenance schedule charges a service fee.
Item Component Maintenance method
Use a soft, wet cloth to wipe the
Mainframe parts
mainframe clean.
Tire pressure Inflate tires to 42-48 psi
Check if the tires are cracked,
Tire wear
deformed, or significantly worn.
Tighten the screws fixed with the
handlebar and the stem. The suggested
torque is 5.5±0.5 N·m.
Screws on the
Tighten the screw on the throttle. The
stem top
suggested torque is 3.5±0.1 N·m.
Mainframe
Tighten the screws on the brake lever.
maintenance
The suggested torque is 5.5±0.1 N·m.
Tighten the screws on the stem top. The
suggested torque is 10±0.5 N·m.
Tighten the screw fixed with the front
Screws on the
fork and screw in the core position of
folding
the folding structure (visible after
mechanism
folding). The suggested torque is 10±1
N·m. Tighten the screws on both sides.
The suggested torque is 12.5±1 N·m.
Tighten screws to fix disc brake base.
Disc brake
The suggested torque is 7.7±0.2 N·m.
base
To accelerate and decelerate, check if
Hub motor
the hub motor is stalled or has
Function
abnormal sounds.
Inspection
Check if the front wheel is stalled or
Front wheel
gets shaky, or the axis shaft is
maintenance
unbalanced.
Every 3 Every 6 Every 12 Every 36
months months or months or months or
every 310 every 621 every 9,230
miles (500 miles (1,000 miles (15,000
km) km) km)
√ √ √ √
√ √ √ √
√ √ √
√ √ √ √
√ √
√ √ √
√ √ √
√ √
√ √
06