Medion LIFE X14320 Guida Rapida página 93

A range of information relating to the use of your Android TV concerning Google Play, the Goog-
le voice assistant and the Chromecast technology will then be displayed. You can press
button to skip these pages.
 Then select the desired TV mode (
 Activate the Chromecast technology if you would like your TV to respond to cast commands as a
cast device when in sleep mode. To do so, select
Please note that enabling this function results in higher energy consumption.
3.7.5. Setting up TV reception
Select the required reception mode
3.7.6. Aerial
Make sure that you have connected a DVB-T2 antenna to the ANT. connection.
 If you do not want to set up any TV channels, select
 Select
and press
SCAN
3.7.7. Cable
Make sure that your cable connection is connected to the ANT. connection.
 Select the desired provider.
 If you do not want to set up any TV channels, select
 Select
and press the  button to start the channel search. Press
SCAN
ure additional settings.
The following options are then available:
SCAN MODE
FREQUENCY KHZ
NETWORK ID
 Then press the  button to start the scan.
12
or
HOME STORE
Tuner mode
Please select your tuner mode:
,
AERIAL CABLE
to start the channel search.
OK
Cable scan configure
Select the required search mode
),
OTHERS ADVANCE
Set the frequency here. The default setting is
Set the network ID here. The default setting is
).
and press .
ON OK
Aerial
Cable
Satellite
or and press
SATELLITE
and press the
SKIP SCAN
and press the
SKIP SCAN
(only for provider selection
FULL
or here.
QUICK
or the 
OK
:
OK
or  button.
OK
or  button.
OK
if you want to config-
OK
.
AUTO
.
AUTO