Publicidad
Idiomas disponibles
Idiomas disponibles
Machine Component Definitions
1.) Coupler. Attaches the log splitter to your vehicle. Fits only 50mm hitch balls.
2.) Hydraulic Cylinder. The hydraulic cylinder has a 4" bore and a 39.4" stroke.
3.) Engine. The air-cooled engine powers the hydraulic pump.
4.) Split Control Handle B. Push down it together with No.14 Split Control Handle A can down the
Wedge to split the log.
5.) Wedge. The wedge features wedge wings and a taper that makes splitting easier.
6.) Log Cradle. Keeps the log on the beam without operator assistance.
7.) Beam. The beam is made of 6" wide flange beam.
8.) Rear Support. The leg supports the log splitter while operating. The leg should be raised while
towing (see Operation Instructions).
9.) Tires. Maximum rated speed is 45 MPH.
10.)
Control Valve – Controls the forward and backward movement of splitting wedge.
11.) Tow Bar.
12.) Front Support.
13.) Lengthening Tow Bar.
14.) Split Control Handle A.
15.) Small Control Valve. Use it to control the Lift Ram to make the beam lift and down.
Publicidad
