Publicidad
Idiomas disponibles
Idiomas disponibles
1. Rotate the front support leg, then attach the rear support leg (76#) under the tow bar weldment by
using hex bolt M10x75 (66#), flat washer Ø10 (12#) and nylon lock nut M10 (9#).
C: ASSEMBLY THE TOW-BAR WELDMENT
1. Assemble the tow-bar weldment on the oil tank frame using hex bolt M12X40 (85#), flat washer
Ø12 (23#) and nylon lock nut M12 (14#).
D: ASSEMBLY THE BEAM WELDMENT
Publicidad
