Cleaning, storage and
replacement parts
adhesive electrodes
• To ensure that the electrodes remain adhesive for as
long as possible, clean them carefully with a damp,
lint-free cloth or clean the underside of the electrodes
under lukewarm, running water and pat dry with a
lint-free cloth. Reapply the electrodes to the carrier foil
following treatment.
cleaning the device
• Remove the batteries from the device before cleaning.
• Clean the device after use with a soft, slightly damp
cloth. If it is very dirty, you can also moisten the cloth
with a mild soapy solution.
• Do not use any chemical or abrasive cleaning agents.
Ensure that no water enters the device.
Reuse of the device
Once it has been properly prepared, the device can be used
again. Preparation includes replacement of the treatment
electrodes as well as cleaning the surface of the device
using a cloth moistened with a mild soapy solution.
Storage
• Do not bend the electrodes.
• Disconnect the electropads when not in use
• Reapply the electrodes to the carrier foil after use.
• Store the device and accessories in a cool, well-
ventilated space.
• Never place any heavy objects on the device.
Replacement parts
Order original electrodes and replacement parts from
terapio.com
13