Avintage AVI82CDZA Manual De Utilización página 47

 Connect the cellar to a single socket and be careful to support it, so that your wine cellar is
perfectly level (use of a spirit level is recommended). This will prevent any movement due to
instability, causing noise and vibration, and will ensure that the door seals perfectly.
 This appliance is intended to be used exclusively for the storage of wine.
 This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Attention
 Store wine in sealed bottles.
 Do not overload the cabinet.
 Do not open the door unless necessary.
 Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
 Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet
in order to avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
Ambient room temperature limits
This appliance is designed to operate in ambient temperatures specified by its temperature class
marked on the rating plate.
CLASS
Extended temperate
Temperate
Subtropical
Tropical
Built-in installation drawings
The wine cooler door seals the installed unit almost completely.
CAUTION: for all of these models, please take into consideration the clearances required for air
intake and exhaust.
Hot air must be driven by the ventilation to the rear wall of the cellar and then expelled upwards. The
ventilation channels shall be at least 200 square centimeters in cross-section.
Warning: to ensure proper operation, the ventilation grilles must never be obstructed or covered.
SYMBOL AMBIENT TEMPERATURES RANGE (°C)
SN
N
ST
T
From +10 to +32
From +16 to +32
From +16 to +38
From +16 to +43
47